Abstract:In order to understand the stability and deformation mechanism of tunnel through fault zone, and to provide theoretical basis for scientific analysis of tunnel excavation through fault fracture zone. Through the indoor large-scale direct shear test of the contact surface between the viscous mud-rock mass prepared by self-made artificial fault gouge and the bedrock with joint plane, the influence of normal pressure, stone content and rock dip Angle on the interface mechanical characteristics of the viscous mud-bedrock contact surface is studied. The interfacial stress-strain relationship shows softening characteristics at low normal stress, and gradually transitions from weak softening to weak hardening with the increase of confining pressure. The initial tangential modulus of the interface increases gradually with the increase of normal stress. 2. The shear strength and stiffness of the interface increase with the increase of stone content; 3. Compared with the block Angle of 0°, the interface strength corresponding to the rock Angle of 90° is improved; 4. The internal friction Angle of the interface has a linear positive correlation with the stone content, and the cohesion path has a negative correlation.