动荷载作用下SPSC-AC抗滑结构的弯矩分配研究
DOI:
作者:
作者单位:

taptap点点官方注册

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)(51568022);江西省自然科学基金重点项目(20202ACB202005);江西省研究生创新资金项目(YC2021-S435)


Study on moment distribution of spsc-ac anti-sliding structure under dynamic load
Author:
Affiliation:

Fund Project:

The National Natural Science Foundation of China (General Program, Key Program, Major Research Plan);Key projects Natural Science Foundation of Jiangxi;Jiangxi Postgraduate Innovation Fund Project (yc2021-s435)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了揭示围桩-土拱弦式耦合抗滑结构(SPSC-AC抗滑结构)在列车动荷载下的弯矩分配规律,更好的用于高速铁路路基蠕滑的防治。基于对合福高铁某桥-隧过渡段路基蠕滑的蠕滑机理和变形特征研究,用Midas/GTS NX建立SPSC-AC抗滑结构防护下的路基-桥墩-边坡三维数值模型,分析在不同速度的列车动载作用下SPSC-AC抗滑结构弯矩分配规律。结果表明:SPSC-AC抗滑结构主控桩间距4d布置形式下,位于弦部的1、3、5和8桩的桩身弯矩分布整体呈现一个“马鞍形”,其他的2、4、6和7桩的桩身弯矩分布基本呈“抛物线”形;各桩桩身弯矩最大值都随着列车行驶速度的增大而增大;同一速度下的稳定阶段各桩弯矩值都表现为8桩>5桩>1桩>3桩>2桩>6桩>4桩>7桩,各桩的弯矩分配比例是8桩为1,5桩为0.96,1桩为0.90,3桩为0.88,2桩为0.80,6桩为0.74,4桩为0.74,7桩为0.68。

    Abstract:

    In order to reveal the moment distribution law of surrounding pile-soil arch chord coupling anti-slide structure(spsc-ac anti-sliding structure) under train dynamic load, it could be better used for the prevention and control of subgrade creep of high-speed railway.Based on the creep mechanism and deformation characteristics of subgrade creep in a bridge tunnel transition section of He-Fu high speed railway, Midas/GTS NX was used to establish the three-dimensional numerical model of subgrade-pier-slope under the protection of spsc-ac anti-slide structure, and the moment distribution law of spsc-ac anti-sliding structure under the action of train dynamic load at different speeds were studied.The result shows: Spacing 4D arrangement of main control piles of the spsc-ac anti-sliding structure, the bending moment distribution of piles1, 3, 5 and 8 presents a "saddle shape" as a whole, and the bending moment of piles 2, 4, 6 and 7 basically presents an “parabola” shape; The maximum bending moment of each pile increases with the increase of train speed; At the same speed, the bending moment of each pile in the stability stage is 8 piles > 5 piles > 1 pile > 3 piles > 2 piles > 6 piles > 4 piles > 7 piles, The bending moment distribution ratio of each pile is 1 for 8 piles, 0.96 for 5 piles, 0.90 for 1 pile, 0.88 for 3 piles, 0.80 for 2 piles, 0.74 for 6 piles, 0.74 for 4 piles and 0.68 for 7 piles.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-11-19
  • 最后修改日期:2021-12-23
  • 录用日期:2021-12-24
  • 在线发布日期:
  • 出版日期:
Baidu
map
关闭